Speed sensor – Great Plains 3-Point No-Till Precision Seeding System User Manual
Page 24
Advertising
298-284m
4/8/2004
Great Plains Mfg., Inc.
Monitor System Option
24
Speed Sensor
Refer to Figure 1
1.
Install the DICKEY-john magnetic pickup sen-
sor (1) to sensor mounting bracket (2).
Refer to Figure 3
2.
Set initial distance between sensor and pick-
up disk at 0.020-0.040 inch. This may need to
be adjusted up or down as necessary.
3.
Secure in place with lock nut (3).
4.
Refer to DICKEY-john Installation and Oper-
ating Manual for further instructions..
Figure 2
18999
Magnetic
pickup disk
Figure 1
1
2
3
Advertising