Great Plains FCP1000 Material Rate - Manual (Page 9)

1/19/2004 148-693B
Great Plains Mfg., Inc. 9
For 157.9 mm (6. 2 in.) Row Spacing (Special Range)
Metering Rate Sprockets
kg/har lb/acre Special
Range
Driver Driven
173.2 155 12:12 12T 21T
182.2 163 12:12 12T 20T
191.1 171 12:12 12T 19T
201.6 180 12:12 12T 18T
213.6 191 12:12 12T 17T
244.9 219 12:12 17T 21T
256.9 229 12:12 17T 20T
270.3 241 12:12 17T 19T
288.2 257 12:12 20T 21T
318.1 284 12:12 21T 20T
334.5 299 12:12 21T 19T
352.4 315 12:12 21T 18T
373.3 333 12:12 21T 17T
428.6 383 12:12 17T 12T
452.5 404 12:12 18T 12T
477.9 427 12:12 19T 12T
503.3 449 12:12 20T 12T
527.1 471 12:12 21T 12T
For 157.9 mm (6. 2 in.) Row Spacing (Special High Range)
Metering Rate Sprockets
kg/har lb/acre Special
Range
Driver Driven
274.3 245 12:12 12T 21T
288.5 258 12:12 12T 20T
302.6 270 12:12 12T 19T
319.2 285 12:12 12T 18T
338.1 302 12:12 12T 17T
387.8 346 12:12 17T 21T
406.7 363 12:12 17T 20T
428.0 382 12:12 17T 19T
456.3 407 12:12 20T 21T
503.6 450 12:12 21T 20T
529.6 473 12:12 21T 19T
558.0 498 12:12 21T 18T
591.1 528 12:12 21T 17T
678.6 606 12:12 17T 12T
716.4 640 12:12 18T 12T
756.6 676 12:12 19T 12T
796.8 711 12:12 20T 12T
834.6 745 12:12 21T 12T
Density Conversion Chart
The fertilizer meter rate charts are based on fertilizer with a density of 1.04 kilograms per litre (65 pounds per cubic foot).
If you are applying fertilizer of a different density, use the following table to convert the application rate.
Example: Your fertilizer has a density of 0.72 kilograms per litre, and you want to apply 100 kilograms per hectare. Multiply
desired application rate by the conversion factor.
100 x 1.45 = 145
Adjust drill to setting closest to 145 kilograms per hectare.
Density, kg/l (lb/ft 3 ) 0.72 (45.0) 0.80 (50.0) 0.88 (55.0) 0.96 (60.0) 1.04 (65.0) 1.12 (70.0) 0.87 (75.0) 0.81 (80.0)
Conversion Factor 1.45 1.30 1.20 1.10 1.00 0.93 0.87 0.81