Great Plains 2N-3020 Operator Manual - Manual (Page 7)

5
Important Safety Information
2/28/08 2N-2420 and 2N-3020 Two-Section Folding No-Till Drill 196-164M-A
Great Plains Mfg., Inc.
838-266C
Red Reflector
838-265C
Amber Reflectors
818-003C
Slow Moving Vehicle
12943
12942
12945
Safety Labels
Your implement comes equipped with all safety labels in place.
They were designed to help you safely operate your implement.
1. Read and follow label directions.
2. Keep all safety labels clean and legible.
3. Replace all damaged or missing labels. Order new labels
from your Great Plains dealer. Refer to this section for
proper label placement.
4. When ordering new parts or components, also request cor-
responding safety labels.
5. To install new labels:
a. Clean the area on which the label is to be placed.
b. Peel backing from label. Press firmly on surface,
being careful not to cause air bubbles under label.