Connect cables (continued), Connect the power cable – Cisco 2100 User Manual
Page 7
Advertising
5
Connect Cables (continued)
AC power
connector
49334
Power switch
Power receptacle
Connect the Power Cable
Step 1
Verify that the Power switch is set to OFF.
Step 2
Connect the black power cable to the
power receptacle on the rear panel of the
IE2100 Series.
Step 3
Connect the other end of the power cable
to an AC power source.
Step 4
Set the power switch to ON.
Step 5
Verify that the IE2100 Series is
operational.
Advertising