Run the setup program (continued), Verify configuration registrar is running – Cisco 2100 User Manual
Page 9
7
Run the Setup Program (continued)
Verify Configuration Registrar
is Running
Once the system has been installed and configured,
you can verify the installation of the Configuration
Registrar by following these steps:
Step 1
Go to a different computer and bring up a
web browser.
Step 2
On the net-site window enter the URL for
the Configuration Registrar.
For example:
http://<ip_address>/config/login.html
where: ip_address is the IP address you
entered during IE2100 Series setup.
The Configuration Registrar login page
appears.
Step 3
Enter the Configuration Registrar Userid
and Password that you entered during
IE2100 Series setup.
Step 4
On the message page, click Continue.
If you have reached the Configuration
Registrar Home page, you have verified the
successful installation on the Configuration
Registrar.