Great Plains FH6800HD Parts Manual - Manual (Page 15)

Revision Comments Part Description Part No. Ref.
Image No. dwg42309
Rev. 1 (S/N C1174B+) 24 FT WING RH 564-015H 1.
Rev. 1 (S/N C1174B+) 30 FT WING RH 564-019H 1.
Rev. 1 (S/N C1174B+) 36 FT WING RH 564-023H 1.
Rev. 1 (S/N C1174B+) 42 FT WING RH 564-027H 1.
Rev. 1 (S/N C1174B+) 45 FT WING RH 564-029H 1.
Rev. 1 (S/N C1174B+) 48 FT WING RH 564-031H 1.
Rev. 1 (S/N C1174B+) 51 FT WING RH 564-033H 1.
Rev. 1 (S/N C1174B+) 24 FT WING LH 564-016H 2.
Rev. 1 (S/N C1174B+) 30 FT WING LH 564-020H 2.
Rev. 1 (S/N C1174B+) 36 FT WING LH 564-024H 2.
Rev. 1 (S/N C1174B+) 42 FT WING LH 564-028H 2.
Rev. 1 (S/N C1174B+) 45 FT WING LH 564-030H 2.
Rev. 1 (S/N C1174B+) 48 FT WING LH 564-032H 2.
Rev. 1 (S/N C1174B+) 51 FT WING LH 564-034H 2.
PIN WING HINGE 1 1/2 X 20 3/4 564-013H 3.
HHCS 1/2-13X2 GR5 802-128C 4.
NUT LOCK 1/2-13 PLT 803-019C 5.
Used with 400 Series only CYL 2X14X1.125 ROD (TIE ROD) 810-707C 6.
Used with 600 Series only CYL 2.5X14X1.125 ROD (TIE ROD) 810-708C 6.
Used with 800 Series only CYL 3X14X1.25 ROD (TIE ROD) 810-709C 6.
PIN CLEVIS 1 X 3 1/8 USABLE 805-396C 7.
PIN 1 X 4 1/2 USEABLE 805-360C 8.
WASHER MACH 1.5X1.00X.075 804-192C 9.
PIN COTTER 3/16 X 2 805-058C 10.
LONG DRAG ARM 564-064D 11.
SHORT DRAG ARM 564-063D 12.
HHCS 9/16-12X3 1/2 GR5 ZNYCR 802-722C 13.
NUT HEX TOP LOCK 9/16-12 ZNYCR 803-319C 14.
GREASE ZERK 1/4-28 THD FORMING 800-080C 15.
07/14/14 - 15 - 564-070P
Table of Contents Part Number Index
Frame
Wing Mounting
(Applies to 400 Series Harrows, 600 Series Harrows, 800 Series Harrows only)