Great Plains 2510HDF Parts Manual - Manual (Page 135)

Revision Comments Part Description Part No. Ref.
Image No. dwg24498
HD10P OPENER WELDMENT 298-855H 1.
HFS 1/2-13X6 1/8GR5 PLT 802-745C 2.
PARALLEL ARM PIVOT BUSHING 817-084C 3.
NUT HEX FLG. LOCK 1/2-13 PLT. 803-169C 4.
Used with dual springs 25P UPPER SPRING LINK 198-292D 5.
25 SERIES UPPER PARALLEL ARM 298-513H 6.
SPRING EXT 1.575O.D.X.225 WIRE 807-076C 7.
Used with dual springs 25P LOWER SPRING LINK 198-293D 8.
25P REAR OPENER INNER PIVOT TB 198-295D 9.
25 SERIES LOWER PARALLEL ARM 298-510H 10.
U-BOLT 5/8-11 X 7 1/32 X 6 1/2 806-053C 11.
NUT HEX 5/8-11 PLT 803-021C 12.
25P FRONT OPENER MOUNT WELDMT 298-884H 13.
WASHER LOCK SPRING 5/8 PLT 804-022C 14.
LOCKUP PIN FOR 10HD OPENER 398-456H 15.
HD10P REAR OPENER MOUNT WELDMT 298-856H 16.
PIN LINCH 3/16 X 1 9/16 LONG 805-240C 17.
Used with single springs 3 13/32 SPRING STRAP 198-240D 18.
11/20/12 - 135 - 288-340P
Table of Contents Part Number Index
Openers
HD10 Series Opener Arms & Mounts
(Applies to 1510HDF, 2010HDF, 2510HDF only)