Great Plains 6548 Series VII Field Cultivator-Rigid Hitch Operator Manual - Manual (Page 14)

Introduction
Table of Contents ► Great Plains Mfg., Inc.
Series VII 6330-6548 Field Cultivator, Rigid Hitch 560-203M 11/11/2008
12
Introduction
Great Plains welcomes you to its growing family of
new product owners. This implement has been
designed with care and built by skilled workers
using quality materials. Proper assembly,
maintenance and safe operation will help you get
years of satisfactory machine use from your
machine. To ease the assembly task and produce
a properly working machine, read this entire
manual before assembling or setting up new
equipment.
Description of Unit
The Series VII 6330, 6332, 6537, 6541, 6544,
6546 & 6548 Field Cultivator is a 3 or 5-section
seedbed preparation tillage tool. Working width is
30 to 48 feet. The implement is designed for
secondary field operations to smooth, level,
eliminate weeds and incorporate chemicals.
Various finishing attachments are available to
further smooth, redistribute residue, firm soil and
break clods.
Using This Manual
This manual will familiarize you with safety,
assembly, operation, adjustment, troubleshooting
and maintenance. Read this manual and follow
the recommendations to help ensure safe and
efficient operation.
The information in this manual is current at print-
ing. Some parts may change to assure top
performance.
Definitions
The following terms are used throughout this
manual.
Right and left as used in this manual are deter-
mined by facing the direction the machine will
travel while in use unless otherwise stated.
IMPORTANT: A crucial point of information about
the preceding topic. For safe and correct operation,
read and follow the directions provided before
continuing.
NOTE: Useful information about the preceding
topic.
Owner Assistance
If customer service or repairs are needed, contact
your Great Plains dealer. They have trained
personnel, parts and service equipment specially
designed for Great Plains products.
Your machine’s parts should only be replaced with
Great Plains parts. Always use the serial and
model number when ordering parts from your
Great Plains dealer. The serial-number and
patent plate (if provided) are located on the center
section of the implement on the front frame tube
as shown in Figure A.
Figure A
Serial Number & Patent Plate
Record your implement model and serial numbers
here for quick reference.
Model Number: __________________________
Serial Number: ___________________________
Your Great Plains dealer wants you to be satisfied
with your new machine. If you do not understand
any part of this manual or are not satisfied with
the service received, please take the following
actions:
1. Discuss the matter with your dealer’s service
manager. Make sure they are aware of any
problems so they can assist you.
2. If you are still not satisfied, seek out the
dealership owner or general manager.
3. For further assistance, write to:
Product Support
Great Plains Mfg. Inc.Service Department
PO Box 5060
Salina, KS 67402-5060
[email protected]
(800)-255-9215