Great Plains EWNT10 4142U-4568U Parts Manual - Manual (Page 61)

Revision Comments Part Description Part No. Ref.
Image No. dwg10248
Rev. 3 is not interchangeable
w/rev. 2
Refer to "Jaw Clutch" for breakdown. JAW CLUTCH CW EXTENDED 176-040S 1.
Rev. 2 is not interchangeable
w/rev. 1
Refer to "Jaw Clutch" for breakdown. RPBY 176-040S 176-038S 1.
1st rev. RPBY 176-038S 176-032S 1.
Rev. 3 is not interchangeable
w/rev. 2
Refer to "Jaw Clutch" for breakdown. JAW CLUTCH CCW EXTENDED 176-041S 1.
Rev. 2 is not interchangeable
w/rev. 1
Refer to "Jaw Clutch" for breakdown. RPBY 176-041S & 176-045S 176-039S 1.
1st rev. RPBY 176-039S 176-033S 1.
HHCS 3/8-16X1 GR5 802-017C 2.
WASHER FLAT 3/8 SAE PLT 804-012C 3.
NUT NYLOCK JAM THIN 3/8-16 PLT 803-215C 4.
7' CLUTCH LEVER ARM WELDMENT 152-077H 5.
10' CLUTCH LEVER ARM WELDMENT 152-069H 5.
7' PIVOT SHAFT WELDMENT 152-129H 6.
10' PIVOT SHAFT WELDMENT 152-130H 6.
PIN COTTER 7/64 X 1 LONG 805-064C 7.
FERT&SEED ENGAGEMENT BAR WELD 152-071H 8.
SEED ENGAGEMENT BAR WELDMENT 152-073H 8.
WASHER FLAT 1/2 SAE PLT 804-016C 9.
GREASE ZERK 1/4-28 X 45-DEG 800-058C 10.
7 & 10 CLUTCH PIVOT SHAFT BRKT 152-243D 11.
HHCS 5/16-18X1 1/4 GR5 802-010C 12.
NUT HEX NYLOCK 5/16-18 PLT 803-084C 13.
WASHER FLAT 5/16 SAE PLT 804-036C 14.
01/19/11 - 61 - 150-082P
Table of Contents Part Number Index
Drives
7' & 10' Clutch Linkage (EWNT7 S/N 1427Q- & EWNT10 S/N 3523U-)
(Applies to EWNT10 (1992+), EWNT7 (1992+) only)