Great Plains YP825AR Material Rate - Manual (Page 50)

46 YP825AR Table of Contents Metric Charts Great Plains Manufacturing, Inc.
401-923B Table of Contents Metric Charts 2013-11-11
Channel Setup: Hydraulic Drive
7. Touch Channel Setup .
Refer to Figure 19(for a YP825AR-16TR30)
Row Monitor Setup (either drive)
8. Touch Work Screen > Next Page >
Row Monitor > Row I/O
Refer to Figure 19(for a YP825AR-16TR30)
The system is now configured for planting with the
canola disk.
Type must be PLANTER CONTROL
for hydraulic drive
Material Name the Canola name just set up
Control Mode Auto
Drive Freq. 100 Hz
Input Filter 50 %
Gear Ratio 1.900
Sensor Constant 360 Pul/Rev
# Seed Rows <specific to planter model and
active row pattern>
PreCharge 0.0 Sec
Figure 21
Channel Setup, Hydraulic Drive
36081
ROW WIDTH <specific to planter model and
active row pattern>
AUTO UPDATE normally Enabled
IMP WIDTH <calculated if Enabled>
ON/OFF PTN EVERY ROW ON
POP/BLOCK PTN EVERY ROW BLOCKAGE
Figure 22
Row I/O Setup, Canola
36082