Great Plains P13929 - Manual (Page 16)

Single Beam Toolbar
Operating Instructions
16
Servicing and Maintenance
4.6 Maintenance Overview
Single Beam Toolbar Maintenance Overview
After first operation Instructions Interval
Check bolt tightness
Check they are firmly seated. Tighten / Secure if necessary -
Refer to table below for bolt torques
---
During operation
Check bolt tightness
Check they are firmly seated. Tighten / Secure if necessary -
Refer to table below for bolt torques
weekly
Tines
Check setting and ensure implements are firmly secured.
Replace tine points before the shank begins to engage the
soil.
daily
Working Depth Check setting and ensure implements are firmly secured daily
After season
Entire machine Carry out cleaning and maintenance ---
Max. Bolt Torques
M12 8.8 10 KgM ( 73 lb.ft)
M16 8.8 24 KgM ( 176 lb.ft)
M20 8.8 47 KgM ( 345 lb.ft)
M24 8.8 80 KgM ( 587 lb.ft)
M30 8.8 150 KgM (1100 lb.ft)
M36 8.8 280 KgM (2055 lb.ft)
5/8" UNC 24 KgM ( 175 lb.ft)