Great Plains 3N-3020 Operator Manual - Manual (Page 31)

3/29/2012 196-366M
29 Operating Instructions
Transporting
Towing the drill at high speeds or with a vehicle that is
not heavy enough could lead to loss of vehicle control.
Loss of vehicle control could lead to serious road ac-
cidents, injury and death. To reduce the hazard, do not
exceed 20 mph.
Before transporting the drill, follow and check
these items:
Unload seed box. Unload seed box before trans-
porting if at all possible. To do so:
• Place tarp under drill or a bucket under each
opener.
Refer to Figure 10
• Use large bucket to empty box as much as
possible. For seed cup cleanout, move han-
dle to the fourth position.
The drill can be transported with a full box of grain,
but the added weight will increase stopping dis-
tance and decrease maneuverability.
Road rules. Comply with all federal, state and lo-
cal safety laws when traveling on public roads.
Clearance. Remember that the drill is wider than
the tractor. Allow safe clearance. Transporting
with Markers
Always transport markers in the folded position.
Figure 10
Seed Cup Door Adjustment
Seed Cup
Door Handle
18841