Great Plains 3P300 Operator Manual - Manual (Page 9)

7
Introduction
3P200 and 3P300 Three-Point Sprayer 500-103M 3/6/06
Great Plains Mfg., Inc.
Introduction
Your machine’s parts were specially designed and should
only be replaced with Application Systems parts. Always
use the serial and model number when ordering parts
from your Application Systems dealer. The serial-number
plate is located as shown in Figure A.
Figure A
Serial Number
Record your sprayer model and serial number here for
quick reference:
Model Number: _________________________________
Serial Number: _________________________________
Your Application Systems dealer wants you to be satisfied
with your new machine. If you do not understand any part
of this manual or are not satisfied with the service re-
ceived, please take the following actions.
1. Discuss the matter with your dealership service man-
ager. Make sure they are aware of any problems so
they can assist you.
2. If you are still unsatisfied, seek out the owner or gen-
eral manager of the dealership.
3. For further assistance write to:
Product Support
Great Plains Mfg. Inc., Service Department
PO Box 5060
Salina, KS 67402-5060
15781
Great Plains welcomes you to its growing family of new
product owners. This implement has been designed with
care and built by skilled workers using quality materials.
Proper setup, maintenance and safe operating practices
will help you get years of satisfactory use from the ma-
chine.
Description of Unit
The 3P200 and 3P300 are three-point-mounted spraying
units.
Intended Usage
Use these sprayers to apply chemicals to production-agri-
culture crops only. Do modify the boom for use with attach-
ments other than those approved by Great Plains
Using This Manual
This manual will familiarize you with safety, assembly, op-
eration, adjustments, troubleshooting and maintenance.
Read this manual and follow the recommendations to help
ensure safe and efficient operation.
The information in this manual is current at printing. Some
parts may change to assure top performance.
Definitions
The following terms are used throughout this manual.
Right-hand and left-hand as used in this manual are deter-
mined by facing the direction the machine will travel while
in use unless otherwise stated.
IMPORTANT: Useful information related to the preceding
topic.
Owner Assistance
If you need customer service or repair parts, contact a Ap-
plication Systems dealer. They have trained personnel, re-
pair parts and equipment specially designed for
Application Systems products.
IMPORTANT: A crucial point of information related to
the preceding topic. For safe and correct operation,
read and follow the directions provided before continu-
ing.