Great Plains 3PD30 Parts Manual - Manual (Page 145)

Revision Comments Part Description Part No. Ref.
Image No. dwg10227
RH FOLDING MARKER MOUNT WELDMT 113-061H 1.
LH FOLDING MARKER MOUNT WELDMT 113-060H 1.
U-BOLT 5/8-11 X 3 17/32 X 5 806-006C 2.
WASHER LOCK SPRING 5/8 PLT 804-022C 3.
NUT HEX 5/8-11 PLT 803-021C 4.
MARKER BODY PIVOT 113-110D 5.
HHCS 1/4-20X2 GR5 802-152C 6.
HHCS 7/16-14X1 3/4 GR5 802-113C 7.
NUT HEX 7/16-14 PLT 803-015C 8.
WASHER LOCK 7/16 PLT 804-014C 9.
PIN LOCK 1/2 X 3 1/2 USABLE LG 805-042C 10.
MARKER ARM WELDMENT 113-063H 11.
20' MARKER ARM WELDMENT 113-084H 11.
GREASE ZERK STRAIGHT 1/4-28 800-001C 12.
MARKER LEVER ARM WELDMENT 113-062H 13.
HINGE PIVOT BAR 113-111D 14.
LH EXT PIVOT BRACKET WELDMENT 113-066H 15.
RH EXT PIVOT BRACKET WELDMENT 113-067H 15.
For 3PD20 drills. CHAIN COIL 1/4 HIGH TEST 67 IN 113-148D 16.
For 3PD27 and 3PD30 drills. CHAIN COIL 1/4 HIGH TEST 94 IN 113-132D 16.
HHCS 3/8-16X1 1/4 GR5 802-079C 17.
WASHER FLAT 3/8 USS PLT 804-011C 18.
WASHER LOCK SPRING 3/8 PLT 804-013C 19.
NUT HEX 3/8-16 PLT 803-014C 20.
HHCS 5/8-11X5 GR5 802-062C 21.
WASHER LOCK SPRING 1/2 PLT 804-015C 22.
NUT HEX 1/2-13 PLT 803-020C 23.
For 3PD20 drills. 20' LH MARKER EXTENSION 113-083H 24.
For 3PD20 drills. 20' RH MARKER EXTENSION 113-082H 24.
For 3PD27 and 3PD30 drills. RH MARKER EXTENSION WELDMENT 113-064H 24.
For 3PD27 and 3PD30 drills. LH MARKER EXTENSION WELDMENT 113-065H 24.
HHCS 5/16-18X1 GR5 802-159C 25.
NUT HEX WHIZ 5/16-18 PLT 803-043C 26.
NUT HEX JAM 1/2-13 PLT 803-036C 27.
SCREW SET SQ HD 1/2-13X1 GR5 801-054C 28.
For 3PD27 and 3PD30 drills. MARKER TUBE 57 LONG 113-355D 29.
For 3PD20 drills. 13' MARKER TUBE 46 1/2 LONG 113-354D 29.
WASHER FLAT 1/2 USS PLT 804-017C 30.
Rev. 2 is not interchangeable
w/rev. 1
Use with 113-563S. HHCS 1/2-13X3 1/2 GR5 802-041C 31.
2nd rev. Use with 113-364S and 113-281H. HHCS 1/2-13X3 GR5 802-039C 31.
Refer to "Standard Marker Hydraulic
Cylinder (810-005C)" for breakdown.
CYL 2X8X1.12 ROD 810-005C 32.
PL 3/8MNPT BREATHER 811-019C 33.
WASHER LOCK SPRING 1/4 PLT 804-006C 34.
NUT-HEX 1/4-20 PLT 803-006C 35.
Rev. 2 is not interchangeable
w/rev. 1
1996<->1997. Refer to "Marker Disk
Assembly (113-563S)" for
breakdown.
MARKER DISC & HUB ASSEMBLY 113-563S 36.
1st rev. 1993<->1995. Service parts available. RPBY 113-563S 113-364S 36.
MARKER BLADE ADJUSTER WELDMENT 113-281H 37.
NUT LOCK 5/8-11 PLT 803-024C 38.
DD BRG FLANGE DUST COVER 107-111D 39.
1991<->1992. Refer to "Marker Disk
(113-305S)" for breakdown.
MARKER DISK & DEPTH BAND ASSY 113-305K 40.
HHCS 5/8-11X3 GR5 802-059C 41.
12/26/12 - 145 - 118-365P
Table of Contents Part Number Index
Markers
3PD20, 3PD27 And 3PD30 Standard Hydraulic Marker
(Applies to 3PD20 (1991-1993) only)