Great Plains 2515P Operator Manual - Manual (Page 36)

2015P and 2515P
173-208M 4/11/2005
34
Changing Seed Meter Wheels
Choose the correct seed meter wheel for the type
of seed you will be using. Be sure to use the same
wheel type on all meters.
Refer to Figure 38
To change seed meter wheels:
1. Shut off seed flow to meters by moving sliding
seed tubes. For more information see page
32.
Refer to Figure 39
2. Clean out meter. For more information see
page 33.
Refer to Figure 40
3. Push in spring-loaded wheel retainer and
turn. Pull off wheel retainer and spring.
Figure 38
Sliding seed tube shut off
18298
Sliding seed
tube
Wheel retainer
and spring
Figure 40
Remove wheel retainer and spring
18294
Figure 37
Meter clean out
19192 Figure 39
Meter clean out
19192