Great Plains 7344 Series VII Field Cultivator-Rigid Hitch Parts Manual - Manual (Page 5)

Great Plains Mfg., Inc. Table of Contents ►
Section 1: Introduction
12/30/2003 Series VII 7332-7344 Field Cultivator, Rigid Hitch 560-198P
1-2
Replacement Hardware
The Hardware Legend above lists hardware abbrevia-
tions used in the parts lists. All bolts and nuts are grade
5 unless otherwise noted. The use of improper grades
of hardware can result in personal injury, damage to
equipment, or loss of property.
Serial Numbers
Always use the serial and model number when ordering
parts. Refer to the operator’s manual for serial number
plate location.
(S/N 20001+) Includes serial numbers 20001
and above (to the latest number)
(S/N 10001
↔
20000) Includes serial numbers between
and including 10001 and 20000
(S/N 10000-)
Includes serial numbers 10000
and below (to the earliest number)
Part Number Service Coding
Within the parts lists some part numbers are coded for revisions
and interchangeability.
Bold face type indicates parts that have been revised. These
parts are considered interchangeable unless otherwise noted.
Service Code Legend:
n First revision, e.g.; o is 2nd revision, pis 3rd
revision, etc.
(Greater numbers are the newest.)
● Use existing stock of this part before ordering
the revision.
⊗ Not interchangeable
⊗coRevision 2 is not interchangeable w/1
Hardware Legend
AR As Required HWHMS Hex Washer Head Machine Screw
BLADE Blade Bolt HXBHCS Hex Socket Button Head Cap Screw
C Cap Screw J Hex Jam Nut
CP Cotter Pin JIC 37 Degree Tapered Thread
CPHSSS Cup Point Hex Socket Set Screw L Helical Spring Lock Washer
CPSHSS Cup Point Square Head Set Screw LUG Lug Bolt
CPSQHSS Cup Point Square Head Set Screw NFC National Fine Cap Screw
CRFCHMS Cross Recess Flat Countersunk Head Mach. Screw NPSM National Pipe Straight Mechanical
CRPHMS Cross Recess Pan Head Machine Screw NPTF National Pipe Taper Fuel
CRPHTFS Cross Recess Pan Head Thread Forming P Wide Plain Washer
CRRHMS Cross Recess Round Head Machine Screw PHMS Pan Head Machine Screw
CRTHMS Cross Recess Truss Head Machine Screw PLOW Plow Bolt
CSNB Countersunk Square Neck Bolt RHMS Round Head Machine Screw
FHMS Flat Head Machine Screw RHSNB Round Head Square Neck Bolt
FTC Full Thread Cap Screw SCREW LEVELING Leveling Screw
H Hex Nut SCREW THUMB Thumb Screw
HCLN Hex Center Lock Nut SCREW WELD Weld Screw
HFLCS Hex Flange Lock Cap Screw SFCHMS Slotted Flat Countersunk Head Machine Screw
HFS Hex Flange Screw SFHMS Slotted Fillister Head Machine Screw
HFSLN Hex Flange Serrated Lock Nut SP Special
HFSS Hex Flange Serrated Screw SP SCREW Special Screw
HHCS Hex Head Cap Screw or Metric Bolt SQHSS Square Head Set Screw
HSBHCS Hex Socket Button Head Cap Screw SRHMS Slotted Round Head Machine Screw
HSFCHCS Hex Socket Flat Countersunk Head Cap Screw SSS Socket Set Screw
HSHCS Hex Socket Head Cap Screw STCS Self Tapping Cap Screw
HSSS Hex Socket Head Screw STHMS Slotted Truss Head Machine Screw
HTLN Hex Top Lock Nut WHEEL Wheel Studs and Hub Long Bolts
HWHCS Hex Washer Head Cap Screw WING Wing Bolt