Great Plains P12720 - Manual (Page 41)

41 X-Press
Operating Instructions
X-Press Troubleshooting
Fault Possible cause Remedy
Wings riding up at
outside of machine
Wings not pressured down
Raise onto transport wheels and
pressure wings down
Wing pressure too low
Increase wing pressure (refer to
page 34)
Hard conditions
Increase wing pressure (refer to
page 34)
Centre section riding up Wing pressure too high
Reduce wing pressure (refer to
page 34)
Machine 'bouncing' in
work
Disc angle too great
Reduce disc angle (refer to
page 24)
6. Faults and Remedies
6. Faults and Remedies
Space for Notes: