Great Plains Power Beyond - Manual (Page 13)

page 1 of 10
ba01031
1 r4
Great Plains Manufacturing reserves the right to make changes or to add improvements to this guide at any time without notice or obligation.
PB 01/03/11
Eaton Aeroquip P/N GG108-NP-10-22
Parker P/N 10M22F8OMXS
Power Beyond Adaptors & Couplers
The parts shown for case drain, motor return, power beyond pressure, and load sense apply
to all John Deere tractors listed in this guide.
IMPORTANT: ALWAYS connect case drain first,
motor return second, then fan pressure line to
prevent motor damage. ALWAYS disconnect fan
pressure line first, motor return second, then case
drain last to prevent motor damage.
1-1/16-12
FJIC
1-1/16-12
MORB
Motor Return
If the tractor is not equipped with a 3/4” body
size, ISO 7241-1 Series A, female motor
return coupler, then order and install the
following parts:
Eaton Aeroquip P/N GG108-NP12-22
Parker P/N 12M22F8OMXS
Eaton Aeroquip P/N 2266-12-12
Parker P/N 12F65OMXS
connected to fan
motor return hose
from Great Plains
M22 x 1.5
MORB
1-1/16-12
MJIC
John Deere P/N RE248312
M22 x 1.5
MORB
M22 x 1.5
FORB
}
supplied from Great Plains
(p/n 811-069C for pair)
5.7”
NOTE: Can use John Deere P/N RE248312 to
extend case drain coupler and motor return
coupler out from rear of tractor if needed.
}
connect to tractor
Case Drain
If the tractor is not equipped with a 3/8” body
size female flat face case drain coupler, then
order and install the following parts:
Parker P/N FF-371-8FO
Eaton Aeroquip P/N 2266-8-8S
Parker P/N 8F65OXS
3/4-16
FJIC
3/4-16
MORB
3/4-16
FORB
flush face coupler
connected to fan case drain
hose from Great Plains
}
Eaton Aeroquip P/N 2215-10-8S
Parker P/N 10-8TRTXN
7/8-14
FJIC
3/4-16
MJIC
M22 x 1.5
MORB
7/8-14
MJIC
connect to tractor