Removing planter steering manifold load sense line – Great Plains Power Beyond User Manual
Page 7
ba01031
1 r4
PB 01/03/11
Great Plains Manufacturing reserves the right to make changes or to add improvements to this guide at any time without notice or obligation.
v
Removing Planter Steering Manifold Load Sense Line
The load sense line must be removed from the planter steering manifold when:
• Connecting to a tractor with a PC Closed hydraulic system.
OR
• Connecting to a tractor with an LS Closed hydraulic system that
has the load sense internally by-passed.
Remove the load sense hose and elbow from the “LS” port on the planter steering manifold. Plug
the “LS” port with 9/16-18 MORB plug (Great Plains P/N 811-675C). Keep the hose and elbow
for use when the planter is connected to a tractor with active load sense.
LS
“LS” Port
If tractor load sense is
internally by-passed, then
remove hose and elbow.
Install plug (P/N 811-675C).
planter
steering
manifold