Great Plains EWNT10 - Manual (Page 2)

7’ & 10’ End Wheel No-Till Clutch Linkage 152-156M 5/3/96 Great Plains Mfg., Inc.
General Information
General Information
Great Plains Manufacturing, Inc. provides this publica-
tion “as is” without warranty of any kind, either express
or implied, while every precaution has been taken in the
preparation of this manual, Great Plains Manufacturing,
Inc. assumes no responsibility for errors or omissions.
Neither is any liability assumed for damages resulting
from the use of the information contained herein. Great
Plains Manufacturing, Inc. reserves the right to revise
Important Notice
and improve its products as it sees fit. This publication
describes the state of this product at the time of its pub-
lication, and may not reflect the product at all times in the
future. Printed in the United States of America.
For your convenience, record your Model Number and
the Date Purchased in the spaces provided below. Have
this information before you when calling Great Plains
Manufacturing, Inc.
This Operator’s Manual applies to No-Till Drill Clutch Linkage Update Kit for:
Description 36’ Drill
7’ Seed Clutch Update 152-151A
7’ Fert. NG Clutch Update 152-152A
10’ Seed Clutch Update 152-154A
10’ Fert. & NG Clutch Update 152-155A
Owner’s Information
Name: _____________________________________
Address ____________________________________
City _______________ State _____Zip ___________
Phone _____________________________________
Name of Dealership___________________________
Dealer’s Name ______________________________
Address ____________________________________
City _______________ State _____Zip ___________
Phone _____________________________________
Model Number ______________________________
Date Purchased _____________________________