Great Plains ADC2220 Assembly Instructions - Manual (Page 8)

167-088M Table of Contents Index 2012-08-17
6 ADC2220 Table of Contents Index Great Plains Manufacturing, Inc.
Introduction
Great Plains wants you to be satisfied with any new
machine delivered by the Great Plains Trucking network.
To ease the assembly task and produce a properly
working machine, read this entire manual before
assembling or setting up new equipment.
Air Drill Cart Document Family
Implement Pre-Delivery Manuals
Description of Unit
The ADC2220 is a pull-type seed cart for volumetric
seeding. A hydraulic fan creates an airflow to supply
seed and dry treatments to a compatible trailing Great
Plains drill.The meter rate can be adjusted.
The ADC2220 Air Drill Cart is compatible with the
following Great Plains air drills:
ADI334
a
34-foot Air Drill Implement
ADI345
a
45-foot Air Drill Implement
CTA4000 40-foot Conventional Tillage Air Drill
CTA4000HD Heavy Duty Tillage Air Drill
NTA3010 30-foot No-Till Air Drill
NTA3510 35-foot No-Till Air Drill
If the air cart and drill were not purchased on the same
original factory order, one or both may not include
compatible components. The implements above may be
configured for use with other air carts. Check with your
dealer before hitching.
Intended Usage
Use this cart with a supported Great Plains air drill
implement. Use the cart for seeding small grains and
legumes or applying dry, granular fertilizer.
167-088M Pre-Delivery Manual (this document)
167-073M Operator and Rate Manual
167-073P Parts Manual
160-037Q CTA4000HD
160-220M NTA3010 and NTA3510
160-243M ADI334
a
and ADI345
a
160-269Q CTA4000
a. Discontinued product listed for reference.
Definitions
The following terms are used throughout this manual.
Right-hand and left-hand as used in
this manual are determined by facing
the direction the machine will travel
while in use unless otherwise stated.
An orientation rose in some line art
illustrations shows the directions of:
Up, Back, Left, Down, Front, Right.
A crucial point of information related to the preceding topic.
For safe and correct operation, read and follow the directions
provided before continuing.
Note: Useful information related to the preceding topic.
Figure 1
ADC2220 Air Drill Cart
16263
U
D
F
B
L
R
L
R