Great Plains 207-216K Operator Manual User Manual
Page 3
Great Plains Manufacturing, Inc.
iii
2014-02-12
204-085M-A
©
Copyright 2007, 2008, 2010, 2012, 2014 All rights Reserved
Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been
taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for
damages resulting from the use of the information contained herein. Great Plains Manufacturing, Inc. reserves the right to revise and improve its products as
it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
Trademarks of Great Plains Manufacturing, Inc. include: Singulator Plus, Swath Command, Terra-Tine.
Registered Trademarks of Great Plains Manufacturing, Inc. include:
Air-Pro, Clear-Shot, Discovator, Great Plains, Land Pride, MeterCone, Nutri-Pro, Seed-Lok, Solid Stand,
Terra-Guard, Turbo-Chisel, Turbo-Chopper, Turbo Max, Turbo-Till, Ultra-Till, Verti-Till, Whirlfilter, Yield-Pro.
Brand and Product Names that appear and are owned by others are trademarks of their respective owners.
Printed in the United States of America
Table of Contents
Important Safety Information .....................................1
Safety Reflectors and Decals .........................................3
Introduction ..................................................................4
Description of Unit ..........................................................4
Intended Usage ..........................................................4
Kits Covered by this Manual...........................................5
Individual Row Kits .....................................................5
Owner Assistance ..........................................................5
Assembly Instructions.................................................6
Before You Start.............................................................6
General Assembly Instructions.......................................6
Tools Required ...............................................................6
Where to Start ................................................................6
UMRC Installation or Update..........................................7
207-221A Update Kit - Prepare Site ...........................7
Update Kit: Remove Arms ......................................7
Update Kit: Remove Mount ....................................8
Install UMRC Adjuster Parts.......................................8
Install UMRC Mount Weldment ..................................9
Install UMRC Cleaner Arm .........................................9
Install UMC-RC Cleaner Arms .....................................10
Install Cleaner Wheel Assemblies................................11
Wheel Identification ..................................................11
Wheel Placement .....................................................11
Mount a Left Wheel ..................................................12
Mount a Right Wheel ................................................12
Install Down Stop (UMC-RC Only) ...........................13
Dual Wheel Placement .............................................14
Offset Dual Wheel ................................................14
Single Wheel Placement .......................................... 15
Row Cleaner Depth...................................................... 16
Selecting Depth........................................................ 16
Row Cleaner Lock-Up .......................................... 16
Adjusting UMRC Depth ............................................ 16
Adjusting UMC-RC Depth ........................................ 17
Troubleshooting......................................................... 18
Maintenance and Lubrication ................................... 19
Maintenance ................................................................ 19
Row Cleaner Maintenance....................................... 19
Lubrication ................................................................... 19
Appendix..................................................................... 20
Torque Values.............................................................. 20
Parts Lists .................................................................... 21
207-213K Dual UMRC Kit ........................................ 21
207-215K Single LH UMRC Kit ................................ 22
207-216K Single RH UMRC Kit ............................... 23
207-092S Single LH UMC-RC Kit ............................ 24
207-093S Single RH UMC-RC Kit............................ 25
207-098S Dual UMC-RC Kit .................................... 26
207-149S Down Stop ............................................... 27
207-221A Mount Update Kit..................................... 28
207-217S Dual Arm Assembly ................................. 29
207-218S Left Arm Assembly .................................. 30
207-219S Right Arm Assembly ................................ 31
207-142V Right Hand Cleaner Wheel...................... 32
207-143V Left Hand Cleaner Wheel ........................ 33
815-255C Hub Assembly ......................................... 34
815-255C_HUB Row Cleaner Hub .......................... 35
Abbreviations ............................................................... 36
Warranty ...................................................................... 37
Index............................................................................ 39