Great Plains 1205NT Operator Manual - Manual (Page 53)

3/28/12 150-131M
51 Maintenance and Lubrication
Clutches
Two zerks on each.
Smear grease on clutch engagement teeth.
Type of Lubrication: Grease
Quantity = Until grease emerges
14755
8
Clutch Linkage
Type of Lubrication: Multi-Purpose Spray Lube
Quantity = Coat thoroughly
8
14756
Gearbox
The gearbox is lubricated and sealed at the factory. Un-
der normal conditions, it does not require maintenance
or lubrication.
If the gearbox has been opened for repair, repack all
gears and around shaft bearings using at least 7 oz. of
gear lube, Great Plains Part No. 788067.
Keep moisture and dirt out of gearbox. Inspect (replace
if needed) the rubber seals on gearbox drive and shifter
shafts.
Spread a small skin coat of anaerobic sealant (Loctite
525 or equivalent) to gear case mating surfaces before
bolting them back together.
Use sparingly. Excess sealant may squeeze off the in-
tended surface and lock bearings or gears.
14757