Compaq iP-60E - Manual (Page 16)

E-1
Please use the following diagrams to determine the screen display size and the type of screen required for any
given projector location.
Projection distances that will be in focus will be 1.4 m (4.6 feet) to 13.9 m (45.9 feet) from the front of the lens.
Please arrange the setup within this range.
Horizontal
Dimension
Vertical
Dimension
Projection Distance
(1.43 m to 13.9 m/1.5 yd to 15.2 yd)
508 x 381
610 x 457
406 x 305
305 x 229
203 x 152
102 x 76
(cm)
250
300
200
150
100
50
(inch)
1 3 5 7 9 11 13 13.9 (m)
Projected Image Size
Width x Height
Projected Image Size
Projection Distance
Tele
Wide
Projection Distance and Screen Size
Wide: The size of the projection image becomes
maximum with the projection image size
adjustment using the zoom lens
Tele: The size of the projection image becomes
minimum with the projection image size
adjustment using the zoom lens
Setup Location
• Do not place the projector in locations that will reach high temperatures or low temperatures.
Operation ambient temperature: 0°C (32°F) to 35°C (95°F)
• Set the screen so that it is not exposed to direct sunlight or the light of direct illumination. When
light hits the screen, the screen show a white cast and will be difficult to watch.
In a bright room, the curtains should be drawn or blinds closed and the area around the screen
kept dark.
• Do not set up the projector in locations exposed to dampness, dust, greasy smoke or tobacco
smoke.
Doing so will result in the adhesion of dirt to lenses, mirrors, and other optical parts and cause a
degradation of image quality.
• Do not place the projector in a location where the ventilation vents will be blocked or in closed ar-
eas having poor ventilation. Doing so will cause the temperature to rise and could cause a fire or
accident. (Vents are located on the bottom and right side of the projector.)
CAUTION