Compaq iP-60E - Manual (Page 25)

E-
A
B
C
To view the portion that has been cut off
Operation with the Projector
Press the SCROLL (
) buttons and scroll the pro-
jection image up or down.
Operation with the Remote Control
Press the SCROLL (
) buttons and scroll the pro-
jection image up or down.
NOTE: When the orientation of the projection image is changed, even if the zoom function is in use, the display of the switched
screen will be adjusted to match the width, the same as with regular changes of orientation.
• Pressing the ZOOM (–) button permits display of a large portion within the
reading range of the vertical display. The undisplayed portion can be displayed
with the SCROLL (
) buttons.
Regular Operation
Enlarging and Reducing the Projection Image
This operation enlarges or reduces the size of projected image.
Adjustment is possible over a range: approximately 25 times (a length ratio of approximately 5 times) in OHP input
mode from the same size, and 16 times (a length ratio of 4 times) in PC input mode and Video input mode.
Operation with the Projector
Press the ZOOM button.
: Enlarge the size of the projected image
: Reduce the size of the projected image
Operation with the Remote Control
(+): Enlarge the size of the projected image
(–): Reduce the size of the projected image