Great Plains V300 Assembly Instructions - Manual (Page 2)

Great Plains Mfg., Inc.
2 Opener Down Pressure Kit
148-771M 11/08/2006
Installation
Remove Level Link Arm
Refer to Figure 2
1. With the drill lowered, the link level arm
➀
is in nei-
ther tension nor compression. Open the float lock
lug
➁
.
Refer to Figure 3
2. At the forward end of the level link
➀
, remove bolt
➁
and nut
➂
. This bolt and nut, and the washers,
are not re-used.
Refer to Figure 2
3. At the rear end of the link level arm, remove cotter
pin
➂
and clevis pin
➃
. The pins (and the wash-
ers) are not re-used.
Note: There is a bushing
➄
in the rocker arm. Do not
remove it.
4. Remove the level link
➀
arm from the drill. It is not
re-used.
Figure 2
Relax Level Link
25166
➀
➁
➂
➃
➄
Figure 3
Remove Level Link
25167
➀
➁
➂