Great Plains NTA2000 Assembly Instructions - Manual (Page 3)

6/5/2009 148-650M
Great Plains Mfg., Inc.
3 Installation Instructions
Refer to Figure 3
8. Connect each sensor to the next one by in-
serting the male end of the wire connection
into the female end of the connection. Leav-
ing the outside wire on the two outside sen-
sors free.
9. Connect the two free wire connections to the
“Y” cable (6).
10. Connect the 20’ cable (7) to the “Y” cable (6)
and route the free end of the 20’ cable (7) to
the front of the drill.
11. Refer to the Agtron instruction manual for in-
formation on properly installing the monitor
and the Hitch Ground Kit to the tractor.
Figure 3
Sensor Connected
20117