Great Plains NTA607HD Operator Manual - Manual (Page 3)

Important Safety Information Great Plains Manufacturing, Inc. 3
12/02/2010 166-365M
Practice Safe Maintenance
▲ Understand procedure before doing work. Use proper
tools and equipment.
▲ Work in a clean, dry area.
▲ Unfold and lower the drill, put tractor in park, turn off
engine, and remove key before performing maintenance. If
work must be performed with implement raised, use center
section lift lock and gauge lock channels provided.
▲ Make sure all moving parts have stopped and all system
pressure is relieved.
▲ Allow drill to cool completely.
▲ Disconnect battery ground cable (-) before servicing or
adjusting electrical systems.
▲ Welding: Disconnect battery ground. Protect hydraulic
lines. Avoid fumes from heated paint.
▲ Inspect all parts. Make sure parts are in good condition
and installed properly.
▲ Remove buildup of grease, oil or debris.
▲ Remove all tools and unused parts from air drill before
operation.
MetaData: End of <Safety Topics>
Null4: