Important safety information, Prepare for emergencies, Tire safety – Great Plains CTA4000 Operator Manual User Manual

Page 5: Wear protective equipment, Avoid high pressure fluids hazard, Safety at all times

Advertising
background image

3

Important Safety Information

2/1/06

CTA4000 Air Drill Implement 160-269M

Great Plains Mfg., Inc.

Prepare for Emergencies

▲ Be prepared if a fire starts.

▲ Keep a first aid kit and fire extin-

guisher handy.

▲ Keep emergency numbers for

doctor, ambulance, hospital and
fire department near phone.

Tire Safety

Tire changing can be dangerous and
should be performed by trained per-
sonnel using the correct tools and
equipment.
▲ When inflating tires, use a clip-on

chuck and extension hose long
enough to allow you to stand to
one side. Do not stand in front of
or over the tire assembly. Use a
safety cage if available.

▲ When removing and installing

wheels,

use

wheel-handling

equipment

adequate

for

the

weight involved.

911

Wear
Protective Equipment

▲ Wear protective clothing and

equipment.

▲ Wear clothing and equipment

appropriate for the job. Avoid
loose-fitting clothing.

▲ Because prolonged exposure to

loud noise can cause hearing
impairment or hearing loss, wear
suitable hearing protection such
as earmuffs or earplugs.

▲ Because operating equipment

safely requires your full attention,
avoid wearing radio headphones
while operating machinery.

Avoid High
Pressure Fluids Hazard

Escaping fluid under pressure can
penetrate the skin, causing serious
injury.
▲ Avoid the hazard by relieving

pressure

before

disconnecting

hydraulic lines.

▲ Use a piece of paper or card-

board, NOT BODY PARTS, to
check for suspected leaks.

▲ Wear protective gloves and safety

glasses or goggles when working
with hydraulic systems.

▲ If an accident occurs, see a doc-

tor immediately. Any fluid injected
into the skin must be surgically
removed within a few hours or
gangrene may result.

Safety at All Times

Thoroughly read and understand the
instructions in this manual before
operation. Refer to Safety Decals,
page 4. Read all instructions noted
on the labels.
▲ Be familiar with all functions of the

unit.

▲ Operate implement from the

driver’s seat only.

▲ Do not leave tractor or implement

unattended with engine running.

▲ Do not dismount a moving tractor.

Dismounting a moving tractor could
cause serious injury or death.

▲ Do not stand between the tractor

and implement during hitching.

▲ Keep hands, feet and clothing

away from power-driven parts.

▲ Wear snug-fitting clothing to avoid

entanglement with moving parts.

▲ Watch out for wires, trees, etc.,

when folding and raising imple-
ment. Before folding or raising,
make sure all persons are clear of
area.

▲ Do not turn tractor too tight, caus-

ing implement to ride up on
wheels.

▲ Operate implement only when

hitched to a Great Plains air drill
cart. Do not modify implement for
use with other machines.

▲ Secure additional weight to center

section only. Use Great Plains
weights

only.

Use

only

four

weights (two pair).

▲ Do not use implement tires as a

step.

Tires

not

touching

the

ground will rotate easily.

Advertising