Great Plains P18140C Operator Manual - Manual (Page 22)

8-10m Press Range
Operating Instructions
22
4.1.1 X-Press
1. Hitch
2. Parking Jack
3. Drawbar
4. Wing Catcher
5. Transport Wheels
6. Wheel Cylinders
7. Out-Rigger Units
8. Discs
9. Levelling Board (if fitted)
10. Single Row 700DD Roll
11. Roll Depth Adjuster
12. Wing Fold Cylinders
13. Levelling Board Cylinders
14. Out-Rigger Adjuster (Vertical)
15. Out-Rigger Adjuster (Lateral)
16. Main Tilt Cylinders
17. Wing Catcher Cylinders
In the X-Press configuration the machine
can be used in reduced tillage systems
to incorporate stubble or to work down
ploughing on lighter soil types. Due to the
massive clearances throughout the machine
the X-Press can operate in situations
where high levels of surface trash exist .
The X-Press is designed for high speed
operation, 8-12 km/h with high volumes of
trash flow being added by the 700mm DD
roller at the rear.
4. Adjustment/Operation
4.1 Description
Fig. 4.01: Simba Great Plains 8-10m X-Press
4. Adjustment / Operation