Great Plains 3PD30 Parts Manual - Manual (Page 155)

Revision Comments Part Description Part No. Ref.
Image No. dwg11264
2nd rev. Refer to "Midway Hydraulic Cylinder
2.5 x 20 x 1.12 (810-118C)" and
"Cross Hydraulic Cylinder 2.5 x 20 x
1.12 (810-118C)" for breakdown.
CYL 2.5X20X1.12 ROD (TIE)1 PIN 810-118C 1.
1st rev. Replaced by 810-118C. CYL 3X20X1.25 ROD (TIE ROD) 810-019C 1.
EL 3/8FNPT 9/16MORB 811-281C 2.
AD 3/8MNPT 811-044C 3.
VALVE 3/8 NEEDLE 810-058C 4.
For 3PD20 drills. HH1/4 R1 192 3/8MNPT 1/2MNPT 811-015C 5.
For 3PD15 drills. HH1/4R1 156 3/8MNPT 1/2MNPT 811-017C 5.
For 3PD27 drills. HH1/4R1 254 3/8MNPT 1/2MNPT 811-294C 5.
For 3PD30 drills. HH1/4R1 323 3/8MNPT 1/2MNPT 811-299C 5.
For 3PD20 drills. SP HH1/4R1 212 3/8MNPT-W/AD 811-297C 6.
For 3PD15 drills. HH1/4R1 176 3/8MNPT 1/2MNPT 811-300C 6.
For 3PD27 drills. HH1/4R1 234 3/8MNPT 1/2MNPT 811-129C 6.
For 3PD30 drills. HH1/4R1 303 3/8MNPT 1/2MNPT 811-034C 6.
CABLE TIE .31X21.5 6DIA 120LB 800-082C 7.
12/26/12 - 155 - 118-262D-h
Table of Contents Part Number Index
Markers
Flat Fold Single Marker Hydraulics
(Applies to 3PD12 (1990-), 3PD14 (1990-), 3PD15 (1990-), 3PD20 (1990-), 3PD27 (1990-), 3PD30 (1990-) only)