Great Plains NTA3510 Assembly Instructions User Manual

General information, Assembly instructions, Harrow option

Advertising
background image

1

Installation Instructions

Great Plains Mfg., Inc.

© Copyright 1998 Printed

Used with:


116-188M

No-Till Air Drill Implement

Harrow Option

NTA3010

NTA3510

General Information

These instructions explain how to install the harrow. The coil-tine
harrow finishes no-till surfaces by leveling and distributing resi-
due for enhanced seed emergence.

These instructions apply to:

116-171A

NTA3510 Harrow

116-172A

NTA3010 Harrow

Manual Update

Refer to the drill operator’s manual for detailed information on
safely operating, adjusting, troubleshooting and maintaining the
harrow. Refer to the parts manual for part identification.

• NTA3010 and NTA3510 Operator’s Manual . . . . . . 160-219M

• NTA3010 and NTA3510 Parts Manual . . . . . . . . . . 160-219P

Definitions

Right-hand and left-hand as used in this manual are determined
by facing the direction the machine will travel while in use unless
otherwise stated.

IMPORTANT: A crucial point of
information related to the pre-
ceding topic. For safe and cor-
rect operation, read and follow
the directions provided before
continuing.

NOTE: Useful information related to
the preceding topic.

Before You Start

Page 4 is a detailed listing of parts in-
cluded in the harrow package. Use this
list to inventory parts received.

Assembly Instructions

Refer to Figure 1.

1.

To assemble the harrow on the implement center section, u-
bolt the mounts to the rear frame tube. Bolt the offset
mounts (1) so the mounting plate is 6 5/8 inches from the
center of the wing pivot pin (2). Bolt the center-section
mounts (3) so the edge of the mount is 5 3/4 inches from the
edge of the center frame tube (4).

2.

Bolt the hanger tubes (5) to the mounts using 1/2-inch bolts

and nylock nuts.

3.

Identify the harrow center sections. (Each center section

has 26 tines.) U-bolt the cen-

ter sections to the hanger

tubes as shown. Mount

center sections so that

tine spacing is even.

16958

When you see this symbol, the subsequent instructions and
warnings are serious - follow without exception. Your life and
the lives of others depend on it!

!!

11/23/98

Figure 1

Harrow Assembly, Center Section

Advertising
This manual is related to the following products: