Cranking revolutions (s/n a1066w-) – Great Plains 3P1006NT Material Rate User Manual
Page 6
Advertising
4
3P1006NT
Great Plains Manufacturing, Inc.
151-144B
2011-10-21
Cranking Revolutions (s/n A1066W-)
(applies to drills with serial number A1066W-
For serial number A1066W-, see above)
The number of revolutions per area is:
Refer to Figure 5
Place the hex socket of the crank on either end of a main
jackshaft at the appropriate gearbox (see table at right).
Note: If weight brackets are installed, there is insufficient
clearance at the left end of the left side shaft. An
electronic acremeter may also be installed there.
Figure 5
Crank on a Shaft Right End
28373
revolutions for
Crank
Tire
Full Acre
568.7
1013.8
56.9
101.4
Full Hectare
1405.3
2505.1
140.5
250.5
32333A
1/10
th
Acre
1/10
th
Hectare
Advertising