B&G Zeus2 12 - Manual (Page 81)

- The waypoint is saved to your waypoint list. This waypoint name will be prefixed with
MOB AIS SART - followed by the unique MMSI number of the SART. e.g. MOB AIS SART -
12345678.
3. Activate the MOB function
- The display switches to a zoomed chart panel, centered on the AIS SART position
- The Zeus
2 creates an active route to the AIS SART position
Ú Note: If the MOB function is already active, this will be terminated and replaced by the new
route towards the AIS SART position!
If you select the AIS SART icon on the chart you will see the AIS MOB details.
Vessel alarms
You can define several alarms to alert you if a target shows up within predefined range limits,
or if a previously identified target is lost.
Alarm ID Description
Dangerous vessel Controls whether an alarm shall be activated when a vessel comes
within the predefined CPA or TCPA. See “Defining dangerous
vessels” on page 45.
AIS vessel lost Sets the range for lost vessels. If a vessel is lost within the set range
this will trigger an alarm
Ú Note: The check box controls whether the alarm pop-up box is
displayed and if the siren will sound. The CPA and TCPA defines
when a vessel is dangerous regardless of the enabled/disabled
state.
Vessel message Controls whether an alarm shall be activated when a message is
received from an AIS target
AIS | Zeus2 Operator Manual 81