B&G Zeus2 12 - Manual (Page 98)

Alarms
Alarm system
The system will continuously check for dangerous situations and system faults while the
system is running. When an alarm situation occurs, an alarm message pops up on the screen.
An alarm icon is displayed in the status bar, and the status bar pulses the color of the alarm.
If you have enabled the siren, the alarm message will be followed by an audible alarm, and
the switch for external alarm will go active.
The alarm is recorded in the alarm listing so that you can see the details and take the
appropriate corrective action.
Type of messages
The messages are classified according to how the reported situation will affect your vessel.
The following color codes are used:
Color Importance
Red Critical
Orange Important
Yellow Standard
Blue Warning
Green Light warning
Single alarms
A single alarm is displayed with the name of the alarm as the title, and with details for the
alarm.
Multiple alarms
If more than one alarm is activated simultaneously, the alarm message will display a list of up
to 3 alarms. The alarms are listed in the order they occur with the alarm activated first at the
top. The remaining alarms are available in the Alarms dialog
19
98 Alarms | Zeus2 Operator Manual