B&G Zeus2 12 - Manual (Page 88)

Operating the audio system
1. Select the Audio tile in the Instrument bar to activate the Audio overlay
2. Select the options icon and select the audio server
3. Select the source icon to select the audio source
- Number of sources depends on active audio server
4. Use the panel buttons to control your audio system.
Refer to the overview of audio control buttons and tools previously in this chapter.
For available options and features for the audio equipment, refer to the documentation
following the audio equipment.
Favourite channels
When a tuner or VHF channel is tuned in, you can add the channel to your favoure list. The
favourite channels can be viewed, selected and deleted from within the Favourite list.
You page through favourite channels by using the up/down audio panel buttons.
Using Sirius radio (North America only)
Channels list
The channels list displays all available Sirius channels, whether or not you have a subscription
for the channel.
Favorite list
You can create a list of your favorite Sirius channels from within the channels list. You will not
be able to add unsubscribed channels.
Locking channels
You can lock selected Sirius channels from being broadcasted unless an unlock code is
entered.
When the function is activated, a 4 digit code must be entered before the locking is
activated.
The same code must be entered before a locked channel can be released.
88 Audio | Zeus2 Operator Manual