Bio-Rad Bio-Plex Manager™ MP Software Upgrade - Manual (Page 82)

7 | Maintenance Routines
80 | Bio-Plex Manager MP Software
Fluidics Preparation Routine
Description of Routine
The Fluidics Preparation routine prepares the fluidics system for daily use.
When to Run this Routine
Run the Fluidics Preparation routine when you replace an empty drive fluid
container or if the drive fluid line is not aspirating drive fluid because the line has
become dislodged.
Estimated Run Time
2 minutes
To Run the Fluidics Preparation Routine
1. Navigate to the Maintenance view.
2. In the Select Routine section, select Fluidics Preparation from the Additional
Routines dropdown list.
3. Add 5 ml 70% isopropanol to the appropriate reservoir in the reagent block.
4. Click Start.