Bio-Rad Bio-Plex Pro™ Wash Stations - Manual (Page 27)

Basic Operation and Maintenance
Bio-Plex Pro and Bio-Plex Pro II Wash Stations 27
If the instrument will be switched off at the end of operation, the Rinse Night
procedure should be performed. This prevents the needles from becoming blocked.
Use the Rinse Night procedure to rinse the wash system as outlined above.
When the rinsing procedure is completed the following message is displayed:
RINSE NIGHT
STOP END
The manifold remains in the prime tray until END is pressed. Press STOP to abort
the procedure (prime tray will not be aspirated).
The most important cleaning procedure for this instrument is rinsing the
liquid system with distilled water at the end of each day.
Changing the Plate Carrier
See Page 16 for detailed instructions on selecting and replacing the plate carrier.