4 incubator controls, 1 incubator set point – Bio-Rad Model 550, Ultramark, and Benchmark Microplate Reader Accessories User Manual
Page 12
Advertising
4
4100172 Rev C
3.4
Incubator Controls
The incubator in the Benchmark Plus is controlled from within Microplate Manager.
3.4.1
Incubator Set Point
The incubator set point is set from within Microplate Manager. The last set point selected in
Microplate Manager is stored in memory inside the Benchmark Plus. The Benchmark Plus will
begin warming up to the last specified set point without opening Microplate Manager, upon
restarting the instrument.
Advertising