BlueAnt M1 Stereo Speakers - Manual (Page 10)

10
Disconnect Phone/Computer from the M1:
Press and hold the On/Off/Stop Button (9) for 2 seconds.
The Bluetooth Indicator (8) will turn to a blinking blue.
Audio Transfer:
While music is streaming, you can easily transfer the audio
from:
Speaker to Phone/Computer:
Turn off the M1 or disconnect your phone / computer
from the M1. Audio will then be transferred back to your
phone or computer.
Phone/Computer to Speaker:
f From OFF, press and hold the On/Off/Stop Button
(9) for 1 second to turn the M1 on. Audio will then be
transferred directly to the M1. Depending on your
mobile phone / computer you may need to transfer the
audio via the phone’s / computer’s menu, or by clicking
the Play / Pause button (2) once.
f When the M1 is on but not connected to any device,
you can simply re-establish a connection by pressing
and holding the Play/Pause Button (2) for 1 second.
Audio will then be transferred to the M1.
Note: Some phones/computers may not support an automatic
audio transfer to the M1. If this is the case, you will need to
transfer audio to the M1 manually using the options on your
phone or computer menu’s.