BlueAnt M1 Stereo Speakers - Manual (Page 8)

8
Streaming Music from a Bluetooth-enabled PC/Laptop:
If your computer’s Bluetooth dongle and Bluetooth
application software supports A2DP, you will be able to
stream music from your PC directly to the M1.
f Open your PC/Laptop’s music player and play a track.
If the M1 is connected, you will hear audio through
the speaker. (Please refer to your computer’s user
manual if required) Once an active connection has
been created & audio is playing through the M1, the
Bluetooth Indicator (8) will turn to a steady blue,
which confi rms that the computer is successfully
connected to the M1.
When connected, you will be able to control the music
via buttons on the M1.
Note: Some computers may require you to manually set-up the
audio output. In this case, please set the output of audio using
the options on your computer.
Connecting music players directly to the M1:
At the back of the M1 is a Stereo Line Input (12) which is
used to directly connect music players via the audio cable.
1. Plug the audio cable into the Stereo Line Input (12)
found on the back of the M1 and place the other end
into the output of your music player.
2. Press the Play button on your music player to play
music via the M1.
3. When the Stereo Line Input (12) is in use, you cannot
control the music player via buttons on the M1.
Please use your music player’s buttons directly.
However, you can still adjust the volume settings,
bass settings and turn the unit On/Off via the buttons
located on the front of your M1.