BlueAnt M1 Stereo Speakers - Manual (Page 21)

21
EN
they cannot travel through it. Therefore, your hand will
create a barrier causing slight interference and a loss of
signal quality.
8. What Bluetooth mobile phones can be used with
the M1 Stereo Speakers?
To use the M1 Stereo Speakers with your phone, the
phone must support A2DP Bluetooth profi le.
10. What is the difference between Bluetooth V1.2
and
V2.0?
V2.0 is the current version of Bluetooth with Enhanced
Data Rate (EDR) technology, with data transfer rates of up
to 3Mbps compared with 1Mbps in V1.2.
Note: All BlueAnt products are forward and backward
compatible (Our V1.2 products can be used with V2.0
phones and our V2.0 products can be used with V1.2
phones)
Troubleshooting
1. How do I re-connect my M1 Stereo Speakers?
Press the Play/Pause button once to re-connect to your phone.
2.
Why won’t my M1 Stereo Speakers go into pairing
mode?
Follow the instructions in the M1 Stereo Speakers Manual.
From off press and hold the on/off button for 5 seconds until
the LED fl ashes red and blue to enter pairing mode. The M1
Stereo Speakers sometimes require a few seconds to establish
a connection. Please be patient while devices are searching.
3. Is my M1 Stereo Speakers unit charged?
The LED will change from fl ashing blue to red when the
battery is low. The charge LED at the back of the M1
Stereo Speakers will light up red when charging and
change to green when the M1 Stereo Speakers are fully
charged.