BlueAnt M1 Stereo Speakers - Manual (Page 22)

22
4. Why can’t I hear any sound from the Speakers?
Check to make sure the M1 Stereo Speakers and the
mobile phone volume are not set too low. Alternatively, the
phone’s memory may have become corrupt and can be
fi xed by rebooting (turning the phone off and on again) the
phone. If this does not resolve the issue, delete the pairing
information and re-pair the devices.
5. Why do my M1 Stereo Speakers sound noisy and
distorted?
Turn the M1 Stereo Speakers and mobile phone volume
down to a level that does not give echo or feedback. A low
battery on the phone or the M1 Stereo Speakers can also
cause the audio quality to drop. If your phone or the M1
Stereo Speakers is indicating a low charge, please charge
the unit.
6. My M1 Stereo Speakers worked great but now
they won’t connect. What can I do?
As newer phones are like mini-computers, the connection may
become corrupt over time and you may need to reset them
every so often (at least once a week is good). Simply switch
off your phone, remove the battery for a few seconds, replace
and reboot. The M1 Stereo Speakers should now connect. If
not, remove existing pairing and re-pair the devices.
7. Why does my phone’s battery not last as long as
it used to?
When Bluetooth is switched ON, your phone will search
for Bluetooth devices in the area to connect to, which will
use more battery power. The M1 Stereo Speakers have
a standby mode that it enters when it’s connected to
your phone and is not being used, which helps minimise
battery loss. This allows the M1 Stereo Speakers to have
outstanding battery life as well as reducing the power
required by the phone.