BlueAnt Supertooth 3 Handsfree User Manual

Page 6

Advertising
background image

6

6. The contacts in your phone will automatically be

downloaded to the SUPERTOOTH 3. The Bluetooth
Indicator (3)
turns violet for 1-2 seconds whilst this
process is being completed.

Note: Some phones require your authorisation prior to

commencing the download of your phonebook entries to the

SUPERTOOTH 3. You must accept a request such as the

following, Connection…?, Allow Internet access…?, DUN…?


7. The number of contacts will be announced whilst the

download is in progress.

IMPORTANT NOTICE: Some Symbian phones do not allow
the automatic download of Phonebook contacts. In this case,
Automatic transfer not supported by phone. Please
refer to manual or press red button to cancel phonebook
transfer.
” will be announced. If this occurs, please proceed to
Section F to transfer the Phonebook entries manually via the
phone’s menu to the SUPERTOOTH 3 or press red button or
End/Reject Button (2) of SUPERTOOTH 3 to connect the kit
to the phone without phonebook transfer.

8. When download is complete, “BlueAnt ST 3 ready.

Connected to phone” will be announced. Accept
connection request from the phone if a prompt is
displayed.

Important Note:

Most phones automatically connect to the SUPERTOOTH
3
once the pairing process is complete. Other phones may
require you to connect manually to the SUPERTOOTH 3
once the devices are paired.
Go back to Bluetooth > Paired devices > highlight BlueAnt
ST 3
> press Options > then press Connect.

The kit is now ready to use. When a call is received on
your mobile phone, the name of the incoming caller will
be announced on the kit.

Advertising