Carlo Gavazzi WM3-96 - Manual (Page 25)

▲ ▲
26
To program the “end date” follow the same procedure de-
scribed above from No. 11 to No. 16. After confirming the “end”
day by means of the
key, the HOLIDAY box is highlighted
to indicate the conclusion of the HOLIDAY period program-
ming cycle. You can also use the (moves from right to left)
and (moves from left to right) keys to scroll along the
available parameters.
It’s possible to choose the tariff to be
associated to the HOLIDAY period
according to the following procedure:
starting from the box on the previous
page, number 10, press the
key
again: the instrument will display the
box shown on the left. Press
: the
box of the “trf” value is highlighted;
press the
key again: the instru-
ment will display on the lower section
the box where the tariff is to be set.
Select the desired tariff (from 1 to 4)
by means of the
and keys
and confirm it with . To reset your
choices and/or exit the menus, use
the
key.
1.2..
..2.1
From page 25
Energy Meters Management
Diagrams
21
22 28
Meters reset
28
pag.
25