Carlo Gavazzi WM3-96 - Manual (Page 31)

▲ ▲
32
Outputs / Other settings
Multi-tariff
27
29 37
Diagnostic
34
consumed active energy (kWh +),
generated active energy (kWh -),
consumed reactive energy (kvarh +),
generated reactive energy (kvarh -),
press the “
” key to open the menu
of energy/pulse output management.
There are five possible selections:
TOTAL, output connected to the total
energy meter; TARIFF, output con-
nected to the desired tariff type.
Confirm with
and go back to the
digital output menu. To reset the
choices and go back to the main menu,
press .
The multiplyer of the measuring unit (kW,MW)
automatically changes according to the CT or VT
ratio set by the user.
❑
Alarms
This function allows the activation of
a static or relay output when an alarm
condition is detected. Select ALARM
from the DIGITAL OUTPUT menu
by means of the and keys,
then press to enter the display
window of all the alarm parameters:
Select the desired variable by means of the and
keys, press to confirm and enter the submenus dedicated
to the various parameters:
•VARIABLE: variables to be connected to the alarm: you can