Outputs / other settings – Carlo Gavazzi WM3-96 User Manual
Page 35
▲
▲
36
Every time a new selection of the variable con-
nected to the analogue output is made, it is
important to check and if necessary program
again all the relevant parameters.
•MIN IN: minimum value of the variable input range. Select the
desired value by means of the
and
keys and
confirm it with
.
•MAX IN: maximum value of the variable input range. Select the
desired value by means of the
and
keys and
confirm it with
. To exit from any of the menus, press
. For further information, see examples No. 1 and 2 on
page 38/39. For the resolution of the value to be
retransmitted, see the note on page 33.
■
Serial output
This function allows the user to set
the parameters of the serial output.
Select SERIAL OUTPUT from the
main menu by means of the
and
keys and confirm it with
.
Select the function you want to set
from one of the submenus by means
of the
and
keys and confirm
it with
. The configurable param-
eters are the following:
• Instrument ADDRESS: from 1 to 255.
• BAUD RATE: 1200, 2400, 4800
and 9600 bit/s.
• PARITY: no parity, even parity and
odd parity. To exit from one of the
menus or cancel a selection, press
.
1.2..
..2.1
Outputs / Other settings
Pulse outputs
31
29
37
Useful information
38