Nikon D3000 - Manual (Page 103)

85
t
D
Measuring Preset White Balance
If no operations are performed while the displays are flashing, direct measurement mode
will end when the exposure meters turn off. The auto meter-off delay can be changed using
the Auto off timers option in the setup menu (
0 130). The default setting is eight seconds.
D
Preset White Balance
The camera can store only one value for preset white balance at a time; the existing value will
be replaced when a new value is measured. Note that exposure is automatically increased
by 1 EV when measuring white balance; when shooting in mode M, adjust exposure so that
the exposure indicator shows ±0 (
0 71).
A
Other Methods for Measuring Preset White Balance
To enter preset measurement mode (see above) after selecting preset white balance in the
information display (
0 80), press J for a few seconds. If white balance has been assigned to
the Fn ( E) button (0 134) and preset white balance selected by pressing the Fn (E) button
and rotating the command dial, the camera will also enter preset measurement mode if the
Fn
( E) button is pressed for a few seconds.
A
Studio Settings
In studio settings, a standard gray panel can be used as a reference object when measuring
preset white balance.