Shooting (all modes) – Nikon D3000 User Manual

Page 198

Advertising
background image

180

n

Shooting (All Modes)

Camera takes time to turn on

: Delete files or folders.

Shutter-release disabled

:

Memory card is locked, full, or not inserted (

0 20, 22, 26).

Built-in flash is charging (

0 29).

Camera is not in focus (

0 28).

CPU lens with aperture ring attached but aperture not locked at highest f-number (

0 157).

Non-CPU lens is attached but camera is not in mode M (

0 159).

Final photo is larger than area shown in viewfinder

: Viewfinder horizontal and vertical frame coverage

is approximately 95%.

Photos are out of focus

:

AF-S or AF-I lens is not attached: use AF-S or AF-I lens or focus manually.
Camera unable to focus using autofocus: use manual focus or focus lock (

0 46, 48).

Camera is in manual focus mode: focus manually (

0 48).

Focus does not lock when shutter-release button is pressed halfway

: Use AE-L/AF-L button to lock focus

when AF-C focus mode is selected or when photographing moving subjects in AF-A mode.

Can not select focus point

:

e Auto-area selected for AF-area mode: choose another mode (0 44).

Press shutter-release button halfway to turn monitor off or activate exposure meters (

0 26).

Can not select AF-area mode

: Manual focus selected (

0 42).

Image size can not be changed

: Image quality set to NEF (RAW) or NEF (RAW)+JPEG basic (

0 51).

Camera is slow to record photos

: Turn noise reduction off (

0 122).

Randomly-spaced bright pixels (“noise”) appear in photos

:

Choose lower ISO sensitivity or turn noise reduction on (

0 122).

Shutter speed is slower than 8 s: use noise reduction (

0 122).

AF-assist illuminator does not light

:

Camera is in

l or m mode (0 30): select another mode.

AF-assist lamp does not light for continuous-servo autofocus. Choose AF-S. In single-point,

dynamic-area, or 3D-tracking AF, select center focus point (

0 46).

• Off selected for AF-assist (

0 122).

Illuminator has turned off automatically. Illuminator may become hot with continued use;

wait for lamp to cool down.

Advertising