Dell u2410 - Manual (Page 23)

Scan Sources
VGA
DVI-D 1 & 2
DisplayPort
HDMI
Component
Composite
Back
Scan for Sources, touch to scan for available input signals.
Select VGA input when you are using the analog (VGA) connector. Touch to select the VGA input source.
Select DVI-D input when you are using the Digital (DVI) connector. Touch to select the DVI input source.
Select DisplayPort input when you are using DisplayPort connector. Touch to select the DisplayPort input source.
Select HDMI input when you are using HDMI connector. Touch to select the HDMI input source.
Select Component input when you are using component video connector. Touch to select the component input source.
Select Composite input when you are using composite video connector. Touch to select the composite input source.
Touch to go back to the main menu.
Color Settings
Input Color Format
Gamma
Mode Selection
Preset modes
Allows you to set the image mode and color format.
Image mode submenu for VGA/DVI-D input(when DVI-D input, Auto Adjust is non-available) Image mode submenu
or
NOTE: Image modes are different between the VGA/DVI-D and Video inputs.
Choose the RGB option if monitor is connected to a computer or a DVD using a VGA or DVI cable. Choose the YPbPr option if monitor is connected to a DVD by a YPbPr to VGA or YPbPr to DVI cable or if the DVD color
output setting is not RGB.
Allows you to set the color mode to PC or MAC.
Allows you to set the display mode to Graphics or Video. If your computer is connected to your monitor, choose Graphics. If a DVD, STB, or VCR is connected to your monitor, choose Video.